Kamikara Tyrannosaurus mechanical Paper Toy - TUTORIAL.

This is a paper mechanical animal toy.
Its mouth will open when you compress its body.
This papercraft is design by Haruki Nakamura / Kamikara for Canon Creative Park.
It also comes with an instruction.

Please watch my build video below:

Thanks for Watching :-)

You can download the template and instruction for free here:
Templates, Instructions
or
Canon Creative Park

or 

here

Lykan Hypersport PaperCraft

My next project will be a Lykan Hypersport PaperCraft. This papercraft was design by Wongday from http://wongday.blogspot.com. Big Thanks to Wongday for the great design. Anyway, I have do some modification to the color scheme of the model and I decided to build the model in half the size of the original template suggested. So I print 2 page of the template into one page of A4 paper. The scale of the finish model will be about 1:15.

Lykan HyperSport PaperCraft (front view)

Lykan HyperSport PaperCraft (rear view)

Lykan Hypersport papercraft print out.

Cutting out the templates.

After I score and fold all the folding lines, I'm ready to build it.

Assembly in progress...

I have assembled the Front and rear section.

Rear and Front section.

And the Roof section.

Roof section.

I have completed the build of the model,
Please watch the build video Part 1 below:

Part 2 Below:

This is not an easy model to make, especially in this scale, so I recommend to build it in bigger original scale.

Template:

You can download the original template from http://wongday.blogspot.com or

Download my modified version here: 

Half scale (as in my build video): Page1, Page2, Page3, Page4, Page5, Page6, Page7, Page8, 

                                                      Page9, Page10, wheels instruction.

*(After you click the link there will be a count down at top right corner then click "skip ad") 

or direct link here:

page1, page2, page3, page4, page5, page6, page7, page8, page9, page10

Original scale : Page1, Page2, Page3, Page4, Page5, Page6, Page7, Page8, Page9, Page10

                         Page11, Page12, Page13, Page14, Page15, Page16, Page17, Page18, Page19

                         Page20, wheels instruction.

Pdo file here: Lykan .pdo file or here

(.pdo file can be open only by Pepakura viewer, if you using a Mac pls watch this video on how to install it)

_____________________________________________________________________________

Paper Windmill DIY for Kids. (without pin)

This is a great project for kindergarten kids and I'm going to do it for the kids.
Usually I will use a pin as the windmill axle, but I think it might be a little bit dangerous for the younger kids. So I use the softer aluminum Craft wire instead.
While making the first windmill, I found the Photos App icon also looks like a windmill.
So, I make another one just look like it, it is the "Photos App Windmill".   (^_^)

Paper Windmill DIY

Please watch build tutorial below:

Thanks for Watching.

Material used:

- Dual color origami paper or normal color paper.

- A Drinking Straw.

- About an inch of aluminum craft wire or paperclip.

Tools:
- scissors
- safety pin
- paper glue
- needle nose plier.

Folding Smart Key holder DIY - very easy.

DIY Folding Key

I always put my keys in the pocket and the keys have all those sharp edges that will tear a hold in my pocket. To solve the problem, I created the key holder inspired by KeySmart or KeyBar. Of Course, those products look more elegant and well build. But why not make one myself for practically FREE.
Since I have all the parts laying around somewhere in my room.

Material needed are just:
2 popsicle sticks,
1 file fastener and
4 rubber washer or a non-slip mat.

Please watch the video below on how to build it:

Thanks for watching :-)

hope you enjoy it.

Lamborghini HURACAN PaperCraft re-build in 1:15 scale.

Huracan Papercraft

I have rebuild the same Huracan papercraft model, because there are many request for the build video of the air scoop of this model Because it is off camera on the last video.
But, I half the size of the model to 1:15 scale on this build, to make sure every step in within the camera viewfinder.

Below is the build video of this model:

Thanks for watching :-)

If you are interested in the bigger model please go to : http://yoshinydesign.blogspot.my/2015/05/lamborghini-huracan-papercraft.html

Template Download here:
Huracan_Template

or

Huracan Template link
for 1:15 scale model, just scale down the template, I print 2 template in page.

you can also scale it to any size you want. :-)

Lamborghini Miura Paper Craft

Lamborghini Miura P400 Paper Craft, (scale 1:24). This paper model is design by Shinya.
I personally think that this is a very good looking Lamborghini and a very good paper model design.
It is quite hard to build, mainly because of its small size. But the result is fantastic worth all the time spend in it.

Lamborghini Miura P400 Paper Craft, 1:24 scale

Please watch the build video below:

Thanks for Watching :-)

The original Template can be downloaded here: SHINYA papercraft  (yellow color)
or modified version in orange color: Page1, Page 2, Page 3, Instruction.

Material used:
- A4 paper 180gsm (printed with inkjet printer)
- Paper glue, like elmer's white glue

Step Up Action Rubber Band Gun James Bond style.

This is a 3 shots semi-automatic rubber band gun. Its dimension is about L150mm x H100mm.It shoot Rubber band size ∅40mm.

PPK Step Up Action Rubber Band Gun

Build Tutorial video:

Thanks for Watching :-)
Just in case you wonder how I make the target, pls watch the end of this video https://youtu.be/3bA8i98-aC8

Material:
- Double Wall Corrugated Cardboard (~ 5mm thickness)
- Normal printing paper.
- 2x Rubber band ∅15mm.
- A lot of Rubber band ∅40mm as ammo.

Tools:
- Inkjet Printer.
- X-Acto Knife.
- Ruler.
- Paper glue. 
- CA glue.

Template Download here:
‣ StepUp_PPK_Page 1
‣ StepUp_PPK_Page 2
‣ Grip Texture

If you are interested wood working, check this out !!
Click Here!

16000 Woodworking Projects