Monday, 21 September 2015

Making a Balisong with popsicle sticks.

Balisongs are illegal in many countries, why don't make yourself one with some popsicle sticks.
This is how I make mine, please watch the making of Balisong video below.


Use this video content at your own risk.
*Please do not sharpen the blade, although its make out of wood, it might still cut your hand or somebody.
Thanks for Watching :-)

Material used:
1, normal size popsicle sticks.
2, a bigger craft stick or 2 popsicle stick glue together.
3, and paper clips.

Tools:
1, Ruler
2, pencil 
3, white glue or wood glue.
4, epoxy
5, pen knife.
6, wood file or metal file
7, small drill
8, some clamps

Compare with balisong comb trainer that I have.

Balisong part name I found from internet.

Dimension Detail below:









I am using two types of stick, their dimension as in the picture.
their thickness are different too, shorter stick is about 2mm, longer stick is about 1.5mm.

The length of the tang is about 30mm, and the knife about 110mm or shorter so it can hide in the handles.

The handle rib to make the handle stronger and also added some more weight to it.
cut it short and glue it to the handle 15mm from the bottom of handle and 20mm from top.
Chamfer the inside edge, so the knife will slot in easily.
refer photo for its locations.

So, the bottom piece is going to be 15mm.

The rib of the knife were approximate, long rib about 75mm,
short one at the tang about 9mm.

Drill hole position at the tang part.

The 6mm gap can be reduce to 5mm.
The pivot pins locations are 12mm apart. 

so that handle will open and close together without gap, because it need extra space for the sidewall when open the knife. as shown below:

Notice the side wall location when opened and when closed.
The drill hole location on individual handle when closed as above.

The side wall length is 85mm
and position it 23mm gap from the handle top. (the gap is for it to clear the tang part when knife opened)

The Tang pin is about 10mm long, can be shorter if you like. and the width is the gap between the handle.

Oh, and the drill hole size is depend on the pin (paperclip) diameter you used.
the hole just need to be a little bit bigger than the pin diameter, so it can rotate freely inside.

Thanks for watching and happy building :-)





"For The Beginning Woodworker, 
The Construction of HandcraftedWood Creations Can Be a Daunting And Overwhelming Experience. 
Well, Not Anymore!"

Click Here!

Thursday, 3 September 2015

Ferrari 458 Italia PaperCraft

This is a really good looking Ferrari.
Powered by a 4.5-litre V8, the 458 Italia stumps up 570bhp and 398lb ft of torque, leading to extreme speed: 0–62mph in 3.4 seconds and a top speed just over 200mph

The scale of this model is about 1:16 scale

Material and tools I used to build build this model are: 
180gm A4 paper (160 ~210gm will do)
White glue {elmer's school glue}
Color printer
Scissor
Ruler
and a lot of patient.

Watch the full build time-lapse below:


Thanks for watching :-)




 if you can't find it, you can download the pdf file from here:
I get the file as it is, please refer to the build time-lapse on how to make it.


3d Printing - Want To Make Money With 3d Printing? Massive Payout! 

Thursday, 13 August 2015

Whistle papercraft - how to build.

A papercraft whistle, is it possible?
This is the question which gets me trying.
I have made a lot of prototype and a lots of trial and error.

After all those prototype, finally I come out with this final design.
I am sure it's not the best but it works every time I build with this template.
I make three version of it, a short one, medium length and long one.
Please watch below build video for details:



Thanks for watching :-)
The template of the whistle can be downloaded here:



Wednesday, 29 July 2015

LEGO Jeep Willys - 31024 alternate build.


This is my original lego design base on Jeep Willys used during WWII
I am happy with the overall design except the wind screen, I just can't recreate it perfectly in this scale with limited parts. 
The model include sits in front and back, also a gas container hanging at the back. 

Review video here:


Build Instruction video here:



Thanks for Watching :-)

you can download the LDD file here:

JeepWillys_LDD file
and .io file here:

and


Jeep Willys Lego mod (rear)
Jeep Willys Lego mod (front)

Jeep Willys Lego mod (side)


Thursday, 23 July 2015

LEGO KTM X-Bow - 31024 alternate build.


This is my original lego design base on KTM X-Bow.
I only use the parts from set 31024.
With limited parts it is very hard to imitate the curvature of the car and I have try my best to do it.
I put red stripe to the side of the body to emphasise the body line, and I think it looks better then without it.


Review video:

Build instruction video in LDD here:


Download LDD file here:
Lego KTM X-Bow LDD file
and .io file here:
31024_KTM_xbow.io

Photos:
Lego KTM X-Bow
Lego KTM X-Bow
Lego KTM X-Bow
Lego KTM X-Bow
Lego KTM X-Bow (side)
Lego KTM X-Bow (side)
Lego KTM X-Bow (rear)
z
Lego KTM X-Bow (rear)
Lego KTM X-Bow (top)

Lego KTM X-Bow
Lego KTM X-Bow
Lego KTM X-Bow mod
Lego KTM X-Bow mod

Thanks for watching :-)

Sunday, 19 July 2015

1911 papercraft gun - classic pistol

paper model 3d paper
Classic 1911 PaperCraft

paper craft gun
Classic 1911 PaperCraft disassembled

This is the papercraft that you can actually build it yourself !!

This paper model is design by Horborginc, you can download the template from link: Hoborginc.deviantart.com
or here:
Page 1, Page 2, Page 3, Page 4, Page 5, Page 6, Page 7 and Page 8
direct link:

If you would like to build the modernized version, you can download the template here:
Page1, Page2, page3, page4, page5, page6, page7 and Page8.
direct link:


Thanks to Horborginc for the design.
It is a good design and lots of effort being put in. 
however, I think this paper model is not computer designed, so some of the part doesn't fit very well,
especially where there is curvature.
Anyway, it does the job and it is free. Thanks again.

There are also many other free paper model guns template, at that webpage.
You can try to build all of them.

I am using:
180gm paper print out from a inkjet printer.
and white glue to glue it all together.

It has working slide, hammer, slide stop and removable magazine.

Please check out the build and review video below:


As always, Thanks for watching :-)

Full build time-lapse video below:
Part 1:

Part 2:

Part 3:

Part 4:

Part 5:

Thanks for Watching :-)


Tuesday, 16 June 2015

Lego Le Mans GTE car - 31024 alternate build.



This is the type A version by Amaman. There are 2 version at Amaman's page at mocpages.com direct link at : http://www.mocpages.com/moc.php/403139

I really like the clever usage of parts in this model, which created a streamline and beautiful cars.
Thanks Amaman for the great design.

Review video will be up soon:

Thanks for Watching :-)